HEMOX Analyzer Specifications:
1. ACCURACY P50: + 1 mm Hg at controlled pH of 7.40 +.01 and a temperature of 37.0°C
2. SAMPLE SIZE: Selectable from 5 to 50 microliters of whole blood or hemolysate.
3. PLOTTING TIME: 30 minutes or less for a complete dissociation or association curve.
4. PHOTOMETRIC SYSTEM: Dual Wavelength Photometer, split beam type, dual photomultiplier detector with log/ratio converter for linear concentration read out, PC-Board circuitry, front panel controls.
5. P02 METER: The Oxygen Electrode system has a digital readout meter with 0.5 mm Hg readability.
6. GAS-SYSTEM: Multi Gas System for use with commercial air and nitrogen tanks, featuring one 2 way and one 3 way solenoid selector valves for gas selection by front panel control.
7. SAMPLE SYSTEM: Built in Pressure-Vacuum Pump for sample filling and flushing of the cuvette, controls located on front panel.
8. TEMPERATURE CONTROL:
Hemox Analyzer Dimensions:
24 in. wide x 16 in. deep x 9 in. high
60 cm wide x 40 cm deep x 23 cm high
Weight: 46 Ibs. or 20 kg
Availible voltages:
120 VAC example: North America
220-240 VAC example: Europe/AISA
100 VAC example: Japan
Our instrument can run from 90-240VAC
TCS reserves the right to change specifications without notice.
2. SAMPLE SIZE: Selectable from 5 to 50 microliters of whole blood or hemolysate.
3. PLOTTING TIME: 30 minutes or less for a complete dissociation or association curve.
4. PHOTOMETRIC SYSTEM: Dual Wavelength Photometer, split beam type, dual photomultiplier detector with log/ratio converter for linear concentration read out, PC-Board circuitry, front panel controls.
5. P02 METER: The Oxygen Electrode system has a digital readout meter with 0.5 mm Hg readability.
6. GAS-SYSTEM: Multi Gas System for use with commercial air and nitrogen tanks, featuring one 2 way and one 3 way solenoid selector valves for gas selection by front panel control.
7. SAMPLE SYSTEM: Built in Pressure-Vacuum Pump for sample filling and flushing of the cuvette, controls located on front panel.
8. TEMPERATURE CONTROL:
- Electrical: Electric cuvette heating system for operation at 37°C, precision proportional temperature controller with thermistor control, digital temperature read out of sample chamber temperature with accuracy of 0.2°C.
- Water Bath: Optional water bath hook up to heat up the cuvette block (Water bath not included)
Hemox Analyzer Dimensions:
24 in. wide x 16 in. deep x 9 in. high
60 cm wide x 40 cm deep x 23 cm high
Weight: 46 Ibs. or 20 kg
Availible voltages:
120 VAC example: North America
220-240 VAC example: Europe/AISA
100 VAC example: Japan
Our instrument can run from 90-240VAC
TCS reserves the right to change specifications without notice.